Solid-state HF Welder
  • 名称: 100KW Tube Welder
  • 型号:
  • 产地:
详细介绍

 

 

 

 

 Rectifying cabinet

Center control console

 Inverter cabinet

Finished Products

Brief Introduction


This equipment mainly used in the field of carbon steel tube & pipe welding and special section tube & pipe welding.


The whole set of this equipment consists of rectifying cabinet, inverter cabinet, central control console, step down

transformer, DC speed adjust unit and cooling system.The basic principal of solid state high frequency is that 3-phase AC current voltage is reduced by the step down transformer, and then enter into the rectifying cabinet

through the rectifying, regulating voltage and filtering and become continuously adjustable DC; then enter into

the inverter bridge(using high-power transistor MOSFET) and become high frequency current, and this high

frequency is supplied to the load tank circuit and then can be used for the induction heating. Inverter tank

circuit power unit using the modular structure, and each power unit can output above 50KW, the number of

the power unit is different according to different power equipment.The tank circuit is a kind of series and

parallel mixing form, no high voltage and no output transformer.


Equipment advantages

1.No high voltage, safety, reliability and high efficiency.

2.The main components are using foreign brands products, such as: IR, IXYS and Siemens.

3.Voltage and Current Double-fed control circuit, stable adjustment, high precision and little interference.

4.Power range 0-100% step-less adjustable, have the advantages of over-voltage, over-current etc.fault protection system.

5.Digital display, simple operating, convenient maintenance.

6.High quality welding, uniform welding seam width, uniform temperature, less burrs in welded tube surface and

inner.


The main technical parameter

Model: GGP100-0.45-H

Application

Operating parameters

Power supply requirements

Pipe diameter

Φ10-Φ35

Rated power

100KW

Supply form

3-Phase four-wire AC line voltage  380 ±5%

Steel Strip thickness

0.5-1.5

Rated DC voltage

250V

  Welding

Induction welding

Rated DC current

500A

Power Capacity

≥150KVA

Rated frequency

450KHZ

Power Factor

≥0.85

Welding speed

60-100(m)

Overall efficiency

≥85%

Power cables

  Plastic copper per phase≥95mm²
Ground≥50mm²

Output frequency power

≥100KW

Operating Environment

This equipment is designed for indoor installation, should avoid the rain, frost and snow, sun exposure, it should also

meet the following conditions:

1.No more than 1000 meters altitude, too high altitude will reduce the air pressure result in bad cooling effect.

2. Ambient temperature -5 ℃ --- + 40 ℃, (less than 0 ℃ should prevent freeze, result in the cooling pipe

blocked and damaged).

3. Relative air humidity less than 85%.

4. No conductive dust explosion, no gas and steam can rust the metal and damage the insulation.

5. No severe vibration and shock

If does not meet the above-mentioned requirements, the customer should notified our company and we can

consider carefully in the equipment design.